Pan Depth: 7.5”
Pan Capacity: 5 Quarts (4.73 Liters)
System Capacity: 6 Quarts (5.68 Liters)
Stroke Clearance: 4.125" (With Steel Rods, Check Crank Scraper Before Final Install)
Description: This aluminum wet sump Circle Track oil pan fits the Small Block Chevrolet engines from 1957-1985 with the two piece rear main seal. This pan was specifically designed to fit the Dirt Dueler Super Stock Chassis that are utilizing the Ford stub with rear steer.
This oil pan features:
- a right side power pouch that starts at the pan rail and runs the full length of the pan
- three access holes for the right side pan rail
- four trapdoors
- a louvered windage tray
- an inspection hole
- an oil check level plug
- Temp sender Port
Dimensions: 8” Long x 11 3/4" Wide x 7.5" Deep
This pan requires a "Tilton Style" mini starter. Kevko #1099, MSD #5095, Tilton #54-40000, Quarter Master #114280, Stephenville #1001, Proform #66256, Powermaster #9400, Allstar #80520. There are many other starters, These are the most common.
| Oil Pump/Pickup Tube Reference | |||
| Pump | Pickup Diameter | Kevko Pickup Tube | |
| M55, M55A, 10553ST | 5/8 | 1003-1 | ADD |
| M155, 10554ST | 3/4 | 1003-1-3/4 | ADD |
| M55HV, 10550ST | 5/8 | 1003 | ADD |
| M155HV, 10551ST | ¾ | 1003-3/4 | ADD |
| 10555ST, 10552ST | ¾ Bolt On | 1003-10555 | ADD |
| M99HVS | 3/4 | 1011 | ADD |
Related Products
Pumps
| M55 | Standard Volume, Standard Pressure, 5/8" |
ADD |
| M55A | Standard Volume, High Pressure, 5/8" | ADD |
| M155 | Standard Volume, Standard Pressure, 3/4" | ADD |
| M55HV | High Volume, Standard Pressure, 5/8" | ADD |
| M155HV | High Volume, Standard Pressure, 3/4" | ADD |
| 10550ST | Performance-25% Increased Volume, High Pressure, Shark Tooth, 5/8" | ADD |
| 10551ST | Performance-High Volume, High Pressure, Shark Tooth, 3/4" | ADD |
| 10552ST | Performance-10% Increased Volume, High Pressure, Shark Tooth, 3/4" | ADD |
| 10553ST | Performance-Stock Volume, High Pressure, Shark Tooth, 5/8" | ADD |
| 10554ST | Performance-Stock Volume, High Pressure, Shark Tooth, 3/4" | ADD |
| 10555ST | Performance-25% Increased Volume, High Pressure, Shark Tooth, 3/4" | ADD |
Gaskets
| Part # | Application | |
| 1882 |
Stroker Oil Pan Gasket (1957-1985) |
ADD |
| OS34510T |
Left or Right Hand Dipstick – 2 Piece Rear Seal (1957-1985) |
ADD |
Miscellaneous Accessories
| Part # | Description | |
| K120 | Oil Pan Bolt Kit | ADD |
| K125 | High Pressure Oil Pump Spring | ADD |
| DP-1 | Drain Plug | ADD |
| DP-1M | Magnetic Drain Plug | ADD |
| 230-7002 | ARP Oil Pump Stud | ADD |
| IS-55E | Melling Intermediate Oil Pump Drive Shaft | ADD |